Steel coil is hot mainly for the following reasons:

First, the production process caused
In the production process of steel, steel coils are usually made by high-temperature smelting and rolling. Starting from iron ore, after iron, steel and other processes, the temperature is often as high as thousands of degrees. The subsequent rolling process also needs to be carried out at a higher temperature to ensure the plasticity and good formability of the steel. For example, in the hot rolling process, the billet is heated to around 1100 ° C to 1300 ° C and is rolled through a series of rolls to form a steel coil. This high temperature processing process makes the newly produced steel coil with a lot of waste heat, so it is hot to the touch.
Second, the impact of insulation measures
In order to improve production efficiency and reduce energy consumption, steel mills usually take certain insulation measures for steel coils on the production line. These insulation measures can slow down the cooling rate of the steel coil, so that the steel coil still maintains a high temperature for a period of time. For example, during transportation, steel coils may be covered with insulation or placed in a warm environment to prevent heat loss too quickly.
Third, the residual heat has not dissipated
Even if the steel coil leaves the production line, due to its own large heat capacity, the internal heat takes a certain amount of time to gradually dissipate into the surrounding environment. Especially for thicker steel coils, the speed of heat dissipation will be slower. Therefore, for some time after production, the steel coil may still be hot.
In summary, the steel coil is hot mainly due to the high temperature processing in the production process, insulation measures and waste heat is not dissipated.
